Commercial Matting Solutions for Hotels, Offices, and Commercial Spaces in the Philippines
Design Ambience supplies commercial matting for building entrances, hotel lobbies, corridors, kitchens, pool decks, gyms, and production floors across the Philippines. The right mat depends entirely on where it’s going: an entrance mat scrapes and absorbs what shoes bring in from outside, a kitchen mat has to survive grease and standing staff, a pool tile has to drain, and an industrial mat might need to handle static, impact, or eight-hour shifts on a hard floor.
This page is organized by area — entrance, branded entrance, kitchen, wet area, gym, and industrial — so you can go straight to the zone you’re specifying for.
Commercial Matting for Different Areas of a Building
A mat that works at a hotel entrance won’t do anything useful in a commercial kitchen, and a kitchen mat won’t survive a swimming pool deck. Matting has to be picked by zone, not by what’s on sale.
- Entrance & Walk-Off Matting — building entrances, lobbies, corridors, elevator landings.
- Custom Logo Mats — the same entrance function, printed with a company or property’s own branding.
- Kitchen & Anti-Fatigue Mats — food-prep areas and workstations where staff stand for hours.
- Pool & Wet-Area Matting — pool decks, showers, locker rooms.
- Gym & Impact Mats — fitness floors under exercise equipment.
- Industrial & Safety Matting — production lines, assembly stations, workshops.
A custom logo mat can provide the practical function of an entrance mat while also putting a company’s or property’s branding in one of the first areas visitors see.
The Logo Mat is 100% nylon, cut pile, printed to a submitted design in up to sixteen colors, with a rubber or vinyl backing and a soft anti-slip surface. It’s machine-washable and rated for both indoor and outdoor use, so it holds up at a covered entrance as well as inside a lobby.
Where it goes: hotel entrances and lobbies, corporate reception areas, retail storefronts and showrooms, restaurants, banks, property sales offices, and event venues — anywhere the entrance mat is guaranteed to be seen.
Why it’s a different kind of product. Every other mat on this page is selected for function — dirt control, drainage, standing comfort. Logo Mat does the same functional job while also working as signage: a hotel’s name at the door, a company’s logo at reception, a brand mark at a retail entrance. It’s the one product on this page built around customization rather than a fixed spec, which is also why it’s worth asking about even if none of the other categories apply to your project.
To start a Logo Mat order, send over the logo or artwork file and the required dimensions — our in-house design team can help prepare artwork that holds up at floor-mat resolution.
Entrance & Walk-Off Mats
The entrance is where most of a building’s incoming dirt and water problem gets solved or doesn’t.
Modular Entrance & Scraper Mats
These sit outside or right at the door — recessed into a mat well or surface-mounted with an edging strip — and do the first, roughest stage of scraping before anyone reaches the lobby floor.
A checkerboard system of UV-resistant PVC tile alternating with brush-textile inserts, snapped together in modules for a durable, heel-safe entrance floor.
| Module | 20 × 20 cm |
| Thickness | 12.5–16 mm |
| Weight | 6.5–7.5 kg/m² |
| Rated for | Up to 85% dust & grit reduction |
A modular nylon-brush tile on a TPE backing for the covered area just outside the door — anti-slip, hydrophobic, and built for outdoor exposure.
| Module | 20.5 × 20.5 cm |
| Thickness | ~12 mm |
| Weight | ~7.0 kg/m² |
| Rated for | 60–70% dust removal alone; 85–95% with a second mat |
A flexible modular PVC scraper with an overlapping, heel-safe circle pattern for drainage, installable flush in a mat well or surface-mounted with edging.
| Module | 20 × 20 cm |
| Thickness | ~9 mm |
| Weight | ~4.35 kg/m² |
| Rated for | Heavy foot traffic, heel-safe drainage |
Carpet-Faced Entrance & Walk-Off Mats
Once the coarse grit is scraped off outside, these roll-good carpet mats absorb what’s left before visitors reach finished flooring — and, unlike the modular mats above, they’re part of what a visitor actually sees.
Nylon cut-pile — denser, better color retention, used where the mat is visible and part of the interior:
A cut-pile nylon mat that absorbs dirt straight from the shoe, colorfast enough for covered outdoor use as well as indoors.
| Yarn Type | Nylon fiber + filament |
| Thickness | ~9 mm |
| Weight | ~3.90 kg/m² |
| Flame Rating | GB 8624-2012 B1 |
A cut-pile nylon mat combining brush rows with absorbing fiber, working as both a scraper and a wiper mat in one.
| Yarn Type | Nylon fiber + filament |
| Thickness | ~9 mm |
| Weight | ~3.80 kg/m² |
| Flame Rating | GB 8624-2012 B1 |
A cut-pile nylon runner built as the secondary, moisture-absorbing stage behind a scraper mat like Ares, sold in long rolls for wall-to-wall fitting.
| Yarn Type | 100% Nylon fiber |
| Thickness | ~9 mm |
| Weight | ~3.83–3.90 kg/m² |
| Flame Rating | GB 8624-2012 B1 |
A thick cut-pile mat for lobbies and corridors where the priority is protecting an expensive stone, marble, or wood floor underneath.
| Yarn Type | Synthetic fiber |
| Thickness | ~10 mm |
| Weight | ~3.90 kg/m² |
| Flame Rating | BS 4790 |
PP fiber and polyester — needle-punched or loop-pile, for corridors, factory walkways, and volume orders where function outweighs finish:
Needle-punch PP fiber with a pineapple-pattern scraper surface, solution-dyed to resist fading outdoors.
| Material | PP fiber, needle-punch |
| Thickness | ~10 mm |
| Weight | ~4.30 kg/m² |
| Roll Size | 200 × 1200 cm |
Needle-punch PP fiber with a classic striped scraper surface, built for the same high-traffic outdoor duty as Pin Mat.
| Material | PP fiber, needle-punch |
| Thickness | ~8 mm |
| Weight | ~3.90 kg/m² |
| Roll Size | 185 × 1800 cm |
A rubber-backed rib-and-herringbone mat that holds onto dirt during rain instead of pushing it further indoors.
| Material | PP fiber, rubber-backed |
| Thickness | ~7 mm |
| Weight | ~4.00 kg/m² |
| Roll Size | 185 × 1800 cm |
PP fiber plus rigid monofilament for a more active scraping action at high-traffic entrances.
| Material | PP fiber + monofilament |
| Thickness | ~9 mm |
| Weight | ~3.80 kg/m² |
| Roll Size | 200 × 1800 cm |
A matched pair of PP fiber entrance mats for medium-to-heavy traffic — Armor Plus adds monofilament for extra scraping, Armor Easy is the lower-cost twin.
| Material | PP fiber (+monofilament on Plus) |
| Thickness | ~9 mm |
| Weight | ~3.80–3.90 kg/m² |
| Roll Size | 200 × 1800 cm |
A general-purpose loop-pile mat for everyday dust control in corridors, kitchens, and washrooms as well as entrances.
| Material | PP fiber + monofilament |
| Thickness | ~8 mm |
| Weight | ~3.80 kg/m² |
| Roll Size | 120–180 × 1800 cm |
The value-priced option for basic dust and moisture control, in a simple three-rib polyester design.
| Material | Polyester, needle-punch |
| Thickness | ~7 mm |
| Weight | ~3.10 kg/m² |
| Roll Size | 120–180 × 2500 cm |
Technical ratings vary by product. Please contact us for applicable technical specifications, test reports, and certifications for the product being specified.
Kitchen & Anti-Fatigue Mats
A commercial kitchen has almost nothing in common with a lobby: staff stand in one spot for a full shift, and the floor around them deals with water, grease, and food debris rather than street dust.
A cotton-microfiber mat built to soak up spills fast — machine washable and ready for reuse right after.
| Material | 70% cotton + 30% microfiber |
| Thickness | ~9 mm |
| Weight | ~2.90 kg/m² |
| Absorbs | Up to 5× its own weight in moisture |
A scraping-and-absorbing mat for kitchen and food-prep entrances, combining PP fiber with a microfiber blend.
| Material | PP fiber + microfiber |
| Thickness | ~9 mm |
| Weight | ~3.90 kg/m² |
| Backing | Vinyl |
A tufted cotton mat that gets better at trapping moisture the more it's washed — built for a regular wash cycle.
| Material | Cotton |
| Thickness | ~10 mm |
| Weight | ~3.40 kg/m² |
| Backing | Vinyl |
An open-grid rubber mat with beveled edges that lets grease and liquid drain through, leaving a dry, non-slip surface underfoot.
| Material | Nitrile rubber |
| Thickness | 11.5 mm (90×150) / 12.5 mm (60×90) |
| Weight | ~8.60 kg or ~4.50 kg/pc |
| Rated for | Grease & oil resistant, REACH compliant |
The same open-drainage, anti-fatigue rubber construction as Slip Guard, built heavier for higher-traffic workstation floors.
| Material | Nitrile rubber |
| Thickness | 14.5 mm |
| Weight | ~12.5 kg/pc |
| Rated for | Grease & oil resistant, REACH compliant |
Pool & Wet-Area Matting
Pool decks, showers, and locker rooms stay wet for hours at a stretch, which is a different engineering problem from an entrance that dries out between rain showers.
Snap-together PVC tiles for pool decks, showers, and tearooms — anti-slip, fire-retardant, and anti-bacterial.
| Material | PVC |
| Thickness | ~9 mm |
| Weight | ~280 g/pc (30×30 cm) |
| Anti-Slip Rating | DIN 51130 R10 |
The same modular PVC tile system at a heavier gauge, for higher-wear wet areas.
| Material | PVC |
| Thickness | ~12.5 mm |
| Weight | ~350 g/pc (30×30 cm) |
| Anti-Slip Rating | DIN 51130 R10 |
The same anti-slip, fire-retardant PVC tile system, sized for washrooms, shower rooms, locker rooms, and workshops.
| Material | PVC |
| Thickness | ~10 mm |
| Weight | ~370 g/pc (30×30 cm) |
| Anti-Slip Rating | DIN 51130 R10 |
A continuous PVC roll rather than modular tiles, for wet areas where a seamless surface is preferred.
| Material | Non-foamed PVC |
| Thickness | ~5 mm |
| Weight | ~3.00 kg/m² |
| Anti-Slip Rating | DIN 51130 R10 |
Gym & Impact Mats
Gym floors take a different kind of load than foot traffic — dropped weights, machines, and repeated impact.
Rubber matting that absorbs equipment impact and vibration, cutting noise transfer to the floor below — available as a roll or interlocking tile.
| Material | SBR + EPDM rubber |
| Thickness | 6 mm (roll) / 20 mm (tile) |
| Weight | ~6.60 kg/m² (roll) / ~4.25 kg/pc (tile) |
| Rated for | Free of heavy metals, GB 36246-2018 |
Industrial & Safety Matting
Industrial floors deal with a specific hazard — standing fatigue, static discharge, or general wear — depending on the work being done.
An electrostatic-dissipative mat with a steel-grid surface pattern, built to stay flat and supportive under long standing shifts at production lines and assembly stations.
| Material | PVC surface + rubber foam core |
| Thickness | ~15 mm |
| Weight | ~7.70 kg/m² |
| Flame Rating | GB 8624-2012 B1 |
Interlocking PVC floor tiles in coin, steel-grid, or leather-texture finishes, with matching safety-yellow edging for logistics floors and maintenance bays.
| Material | PVC |
| Tile Size | 50 × 50 cm |
| Weight | ~1.60 kg/pc |
| Flame Rating | GB 8624-2012 B1 |
How to Choose
| Area | Recommended Matting |
|---|---|
| Main building entrance | Flexi Guard 96Walk OffFirst Guard |
| Hotel or corporate lobby | Atrium PlusAres MatAthens MatCero MatVIP Mat |
| Custom branded entrance | Logo Mat |
| Corridor / back-of-house | Pin MatLin MatTread MatOle PlusArmor PlusArmor EasyM4000Rib Mat 3000 |
| Kitchen doorway | Magic MatAction MatClean Step Mat |
| Kitchen workstation | Slip GuardHex Guard |
| Pool deck / shower / locker room | Comsan TileComex TileComil TileS Mat |
| Gym / fitness floor | Anti-Shock Mat |
| Production line / assembly station | Dalkar Mat |
| Workshop / parking / logistics floor | Radon Mat |
If you already know which product you need, send the name and required dimensions. If you’re not sure, send photos, a floor plan, or a description of the area and we’ll narrow it down.
Specification Support for Designers, Architects, Procurement, and Facilities Teams
For Interior Designers. Color, pile, and texture options for visible zones — lobby, corridor, reception — plus whether a Logo Mat fits the property’s branding at the entrance.
For Architects. Recess depth and mat-well dimensions for Flexi Guard 96, Walk Off, or First Guard need to be coordinated into the floor plan and finished floor level before the slab or screed is set, not after.
For Procurement Teams. Roll sizes, weights, and quantities for freight and storage planning. Sending the application, approximate dimensions, floor plan or site photos, and required delivery date lets us put together a quotation without back-and-forth.
For Contractors. Installation approach differs by product family — modular PVC and rubber systems are assembled on-site tile by tile, while carpet-faced mats are supplied as cut rolls. Confirm which before scheduling the install.
For Property and Facilities Teams. Replacement matting for an existing building is sized against what’s already there — existing dimensions, traffic level, and current condition — rather than a fresh specification from zero.
Installation and Maintenance
Recessed and modular mats (Flexi Guard 96, Walk Off, First Guard, and the PVC wet-area tiles) snap together on-site and can be set flush into a mat well or surface-mounted with an edging strip — this needs to be planned into the floor design if it’s meant to sit flush with the finished floor.
Carpet-faced entrance mats are supplied as cut rolls, loose-laid or fitted wall-to-wall, and are cleaned the same way as broadloom carpet: regular vacuuming, with periodic deep cleaning through Design Ambience’s Chem-Dry service to lift ground-in dirt without oversaturating the backing.
Rubber, cotton, and PVC mats can be hosed down, machine washed, or pressure cleaned depending on backing type — confirmed per product at the point of order.
Nationwide Supply
Design Ambience supplies and coordinates delivery of matting for hotels, offices, and commercial properties in Metro Manila, Cebu, Davao, and other provincial sites across the Philippines, and handles reordering for facilities teams replacing entrance and kitchen matting on a set cycle.
- Service Areas: Metro Manila · Makati · BGC · Ortigas · Quezon City · Cebu · Davao · Clark · Bacolod · Iloilo
- For projects outside these areas, contact our team to discuss delivery and project requirements.
Why Choose Design Ambience for Commercial Matting?
- We match the product to the area, not the other way around — location, traffic, and exposure to water or grease decide the recommendation, not what’s easiest to sell.
- In-house design support for Logo Mat orders — the same team that develops custom carpet artwork for our hospitality clients can prepare logo and branding artwork for a mat.
- We’re a full-line supplier, not just a matting vendor — the same team also handles our commercial carpet lines, wallcovering, and wooden floors, so a hotel or office fit-out can be specified and coordinated in one place.
- Project coordination from quotation through measurement and installation requirements.
- After-sales support, including cleaning guidance and Chem-Dry deep cleaning for carpet-faced mats.
FAQs
An entrance mat scrapes and absorbs dirt and moisture from footwear at a doorway. An anti-fatigue mat cushions someone standing in one place for hours, typically in a kitchen or on a production line, and is built from rubber rather than carpet fiber.
A mat placed at or near a building entrance to remove dirt and moisture from footwear before people reach the interior floor — commonly used in hotels, offices, malls, and retail stores.
A mat installed into a floor recess or mat well so it sits flush with the surrounding finished floor. Flexi Guard 96, Walk Off, and First Guard can all be installed this way, or surface-mounted with edging where a recess isn’t available.
Yes. Logo Mat is custom-printed to your submitted artwork in up to sixteen colors and is machine-washable for repeated use at an entrance.
Hotel entrances and lobbies, corporate reception areas, retail stores and showrooms, restaurants, banks, and event venues — anywhere the mat is meant to be seen, not just walked on.
Yes. Send your approved logo or artwork and our in-house design team can help prepare it for production.
Slip Guard and Hex Guard are open-grid rubber mats built for grease and standing fatigue at a workstation. Magic Mat, Action Mat, and Clean Step Mat are absorbent options for doorways and prep areas where moisture control matters more than drainage.
Comsan Tile, Comex Tile, Comil Tile, and S Mat are PVC products built to drain water through the surface — a different construction from carpet-faced entrance mats, which aren’t built for constant wet exposure.
This depends on foot traffic and zone — a covered outdoor entrance mat in a busy lobby wears faster than a secondary indoor mat. Facilities teams typically set a replacement cycle based on visible wear rather than a fixed calendar date.
Fire-rating and test information varies by matting product. Some products have documented ratings such as BS 4790 or GB 8624-2012. Contact Design Ambience for the applicable technical documentation for the specific product being specified.
The area or application, required dimensions, quantity, project location, a floor plan or photos if available, and your target delivery date. If you’re not sure which product fits, send the area details and we’ll recommend options.
Yes, subject to project coordination and site conditions.
Send us your floor plan, dimensions, site photos, or project requirements.
